Tree trimming in Mill Creek, Washington
Mill Creek’s tree code bans cutting within 100 feet of a year-round watercourse or on slopes of 25% or more, so where your tree stands matters as much as what you do to it.
3–8 crew-hours; not a quote.
For lines they own; the service drop is yours.
Plan pruning around the wet season.
Pruning rules and permits in Mill Creek
Location drives the rules in Mill Creek. MCMC 15.10.040 bars cutting within 100 feet of a year-round watercourse or on slopes of 25% or more, and any tree in a critical-area, roadway or property buffer is regulated regardless of size. Elsewhere, a land clearing and tree cutting permit is needed to remove any tree over 6 inches in diameter at 4.5 feet, to clear more than 500 square feet, or to work on 25%+ slopes. Dead and diseased trees are exempt.
The code on file addresses removal and clearing, not routine pruning, so crown thinning on a flat, unbuffered lot is not the trigger. Pruning so severe that it kills the tree is another matter. Violations carry a $1,000 fine.
For street trees, any right-of-way work needs a ROW work permit under MCMC 12.04. Questions go to the Permit Center at 425-551-7254.
Permit required for trees 6 in DBH and up
Threshold: Trees over 6 in diameter at 4.5 ft (MCMC 15.10.020(B)); any tree in critical-area, roadway or property buffers
Allowances and tiers: Land clearing/tree cutting permit to remove any tree over 6 in, clear over 500 sq ft or work on 25%+ slopes; dead/diseased trees exempt (15.10.030(E),(G))
Fee: Set by council resolution
Street trees: No street-tree chapter in MCMC Title 12; new street trees from the Approved Street Tree List; ROW work needs a right-of-way work permit (MCMC 12.04)
Issued by: Community Development & Planning (Director); Permit Center 425-551-7254, permitcounter@millcreekwa.gov
MCMC 15.10.015(F), 15.10.020(B), 15.10.030, 15.10.040, 15.10.060, 15.10.075, 15.10.090 · Official page · Checked 2026-10-02
Power lines and utilities in Mill Creek
Snohomish County PUD maintains primary lines but does not maintain vegetation around service lines or stand-alone communication lines. The drop to your house is yours to keep clear.
The 10-foot rule is fixed: only a qualified electrical worker may work within 10 feet of a primary conductor. If a limb is near the primary, call the PUD at 425-783-1001 first. When replanting near the street, pick from the city’s Approved Street Tree List. See trees near power lines.
| Utility | Outage line | Tree trimming requests |
|---|---|---|
| Snohomish County PUD | 425-783-1001 (https://www.snopud.com/outages-safety/outage-center/) | request page |
Snohomish PUD serves all of Snohomish County
Source: utility vegetation-management pages linked above; WAC 296-24-960 (WA L&I). Checked 2026-10-02.
What trimming costs in Mill Creek
Trimming costs follow crew-hours in the modeled range below. Steep or streamside lots add rigging time and possibly a permit conversation; a flat yard with clear access sits lower.
BLS reports 310 tree trimmers and pruners in the Seattle-Tacoma-Bellevue area at a $33.85 mean hourly wage, the model’s labor index. It is a wage, not a price (methodology).
| Tree size | Crew-hours | Washington modeled range |
|---|---|---|
| Small ornamental | 1–3 | $200–$650 |
| Medium tree | 3–8 | $650–$1,700 |
| Large or mature tree | 8–16 | $1,700–$3,350 |
Modeled estimate, not quotes (method): crew-hours × $210 per crew-hour, rounded to $50.
Source: BLS Occupational Employment and Wage Statistics, May 2025, SOC 37-3013. Checked 2026-10-02.
When to trim in Mill Creek
FEMA rates Snohomish County’s ice storm risk Very High, with a score of 98.0, and 82% of the county’s NOAA storm reports arrive between November and February. Thin heavy crowns before the season so ice and snow have less to grab.
In USDA zone 8b, structural cuts on deciduous trees fit the dormant months; streamside trees may also need timing that fits any buffer review.
Month-by-month guide: best time to trim trees in the Pacific Northwest. Types of pruning: crown thinning and reduction.
What to do next
Check your distance to the nearest year-round stream and the slope under the tree before planning any heavy cutting. On a flat, unbuffered lot, routine pruning is straightforward; elsewhere, ask the Permit Center first.
Verify the contractor through the Washington license lookup. The Mill Creek tree removal page covers the 6-inch permit in full.
Back to tree service in Mill Creek · Tree trimming across WA and OR · Tree trimming in Washington · cost guide.
Sources
- Mill Creek tree code (MCMC 15.10.015(F), 15.10.020(B), 15.10.030, 15.10.040, 15.10.060, 15.10.075, 15.10.090), checked 2026-10-02.
- BLS Occupational Employment and Wage Statistics, May 2025, SOC 37-3013, checked 2026-10-02.
- NOAA NCEI Storm Events Database, 2016 to June 2026, checked 2026-10-02.
- NWS zone-county correlation files (2019 to 2026 versions), checked 2026-10-02.
- Snohomish County PUD vegetation management, checked 2026-10-02.
Comparing quotes? Check these eight things first.
Two quotes for the same tree can differ by thousands. The gap is usually in what's included, not the cutting.
We don't vet or license anyone. These are the official lookups; each takes about a minute.
| What | Where | What it shows |
|---|---|---|
| Oregon CCB license | CCB license search | Active status, bond, insurance on file, complaints |
| Oregon LCB license | LCB verify a license | Landscape contracting license, which covers tree work |
| Washington contractor registration | L&I Verify | Registration, bond, workers' comp, lawsuits, violations |
| ISA Certified Arborist | ISA directory | Current certification and credential number |
How to read them: Oregon guide · Washington guide
Westcoast-Tree.org is an independent information site. If you call a number on this site, the call goes to a tree service that covers your area and we may be paid a referral fee by that company. We don't perform tree work and we don't vet, license or insure anyone. Cost figures are modeled estimates, not quotes (method). Not affiliated with the former Westcoast Tree Care Inc of Tumwater, WA.