Tree service in Marysville, Washington

Tree removal permits in Marysville

Marysville’s rule is about ground, not girth. The city’s hazardous-tree handout, which points to MMC 22E.010 on critical areas, says a clearing and grading permit is needed when the work sits in a sensitive area or its buffer, moves 50 or more cubic yards of fill or excavation, or clears more than 1,000 square feet, and it counts tree felling and topping as clearing. A single tree on a dry, flat lot away from a stream or wetland usually falls outside all three triggers.

Because the answer depends on the site, find out what is mapped under your lot before you book a crew: a wetland, steep slope or stream buffer changes it. Community Development at 360-363-8100 can tell you whether a critical area touches the parcel, and the same number reaches Public Works Streets for a hazardous tree in the right-of-way. Trees near power lines go to Snohomish PUD rather than the city. No fee was published for the clearing permit, so ask when you call, and compare how other cities draw the line in the Washington permit guide.

Every city compared: tree removal permits in Washington.

Source: Community Development (360-363-8100), MMC 22E.010 (Critical Areas Management) per handout. Checked 2026-10-02.

Storm records for Snohomish County (covers Marysville)

Snow, not wind, drives Snohomish County’s storm record. NOAA logged 139 reports for the county since 2016 and 68 of them, almost half, are heavy snow, with another 18 for winter weather, 11 for ice storms and 8 for winter storms; high wind contributes 26. FEMA’s National Risk Index (December 2025) reads the same way, rating ice storm risk Very High with a score of 98.0 and winter weather Relatively High at 94.0, while strong wind scores a Very Low 7.8.

For tree work that means the damage pattern is weight rather than uprooting: snapped leaders, split codominant stems and limbs bent down onto service lines after a wet lowland snowfall. The county ranks 15th of 39 in Washington by report count, and 82 percent of its reports fall between November and February, with February, December and January the busiest months.

NWS forecast zones covering the county: Cascades of Snohomish and Northern King Counties; Downtown Everett / Marysville Area; Foothills and Valleys of Snohomish and Northern King Counties; Foothills and Valleys of the North Cascades; Lowlands of Western Skagit and Northwestern Snohomish Counties; Shoreline / Lynnwood / South Everett Area.

Source: NOAA NCEI Storm Events Database, 2016 to June 2026 · NWS zone-county correlation files (2019 to 2026 versions). Checked 2026-10-02. NOAA Storm Events 2016-2026; zone-based events assigned to every county the NWS zone covers using the zone-county correlation file in force on the event date (2019-04-02 file used for 2016-2018).

Power lines and utilities in Marysville

Snohomish County PUD maintains the vegetation along its primary lines, and that is where its responsibility stops: the utility says plainly that it does not maintain vegetation around service lines or stand-alone communication lines, so the drop from the pole to your house and any tree growing into it are yours. Work within 10 feet of a primary conductor must be done by a qualified electrical worker, which rules out a general tree crew for anything near the main line.

Report an outage or a tree on a line at 425-783-1001. The city’s own handout sends trees near power lines to the PUD rather than to Community Development, so start there, and see tree removal near power lines for how a job near the service drop is sequenced.

Snohomish PUD serves all of Snohomish County

Source: utility vegetation-management pages linked above; WAC 296-24-960 (WA L&I). Checked 2026-10-02.

Growing conditions in Marysville

Marysville is in USDA hardiness zone 8b, mild enough for the full range of native conifers and broadleaf trees to replant after a removal. The county’s 68 heavy-snow and 11 ice-storm reports argue for choosing shape over speed: a single strong leader, no narrow V-shaped forks, and a planting spot well clear of the primary line so the tree never needs the qualified-worker rule applied to it.

USDA hardiness zone 8b (2023 map, by ZIP code).

Source: USDA Plant Hardiness Zone Map 2023 (OSU PRISM ZIP data). Checked 2026-10-02.

Labor index for Marysville

Marysville falls in the Seattle-Tacoma-Bellevue metro for wage data, and BLS puts the mean hourly wage for tree trimmers and pruners there at $33.85 (May 2025), with a median of $32.75 across roughly 310 workers. That is a wage, not what a job costs; the crew-hour figure behind the modeled ranges on the service pages adds the truck, chipper, insurance and disposal on top. Use it to judge whether a bid that looks cheap is cutting corners on labor.

Seattle-Tacoma-Bellevue, WA: $33.85 per hour mean wage for tree trimmers and pruners (BLS, May 2025). This is a labor index, not a price; the modeled crew-hour cost used on this site is $210 (method).

443 landscaping-services establishments were counted in Snohomish County in 2023 (Census County Business Patterns, NAICS 561730).

Source: BLS Occupational Employment and Wage Statistics, May 2025, SOC 37-3013 · U.S. Census Bureau, County Business Patterns 2023, NAICS 561730. Checked 2026-10-02.

ZIP codes and nearby cities

Five ZIP codes carry most of Marysville’s land: 98270, 98271, 98201, 98223 and 98292. Lake Stevens and Arlington are each 6 miles away, Everett is 8, and Mukilteo, Mill Creek and Monroe sit 14 to 17 miles out, all within a short drive but each under its own permit rule. Storm, hazard and utility data for the whole county is on the Snohomish County page.

ZIP codes with the most land inside Marysville: 9827098271982019822398292

• Lake Stevens6 miles
• Arlington6 miles
• Everett8 miles
• Mukilteo14 miles
• Mill Creek15 miles
• Monroe17 miles

County page: Snohomish County.

Source: U.S. Census Bureau, 2020 ZCTA to place and county relationship files. Checked 2026-10-02.

Tree services in Marysville

Each service page below pairs Marysville’s clearing rule with the Washington modeled range for that job. Removal turns on whether the tree stands in a critical area; trimming is mostly about the PUD’s hands-off policy on service lines; stump grinding needs the 811 locate and a plan for the chips; and the emergency page covers the order of calls after a lowland snow night.

• Tree removal (statewide guide)
• Tree trimming in Marysville
• Stump grinding (statewide guide)
• Emergency tree service (statewide guide)
• Arborists and tree health
• Check a license in Washington

What to do next

Check the critical-areas map for your parcel first, then decide whether the job is a single removal or a clearing. For one tree outside a buffer you can book a crew directly; for a leaning or cracked tree, a risk assessment tells you whether it is a hazard and whether it can wait. Before you sign, run the company through the Washington license lookup.