Stump grinding in Tigard, Oregon
Tigard is inside Oregon’s emerald ash borer quarantine, so an ash stump’s grindings and wood cannot leave the area as raw wood. Chips must be 1 in or smaller, and the utility locate through 811 comes before the grinder.
$150 minimum; not a quote.
Oregon locate notice before grinding near lines.
Rules for burning the debris.
Before the grinder arrives in Tigard
Emerald ash borer is confirmed in Tigard and the city lies inside the Oregon quarantine. ODF and ODA rules say raw ash wood stays inside the quarantine. It can move out only as chips of 1 in or less, as kiln-dried debarked lumber, or after heating to a 160F core for 60 minutes with ODA permission. Cover any load moved from April 1 to September 30, the borer’s flight period. Background is on our emerald ash borer page and at OregonEAB.com.
Before any grinding, call 811 for a free utility locate. Grinders cut well below grade and reach out into roots, where gas, water and irrigation lines run.
Grinding needs no Tigard permit on its own. The removal before it might: street and median trees, heritage trees and Urban Forestry Fund trees all need a city permit, with replacement required in most cases.
What stump grinding costs in Tigard
BLS puts the mean wage for tree workers in the Portland-Vancouver-Hillsboro area at $35.04 an hour. That wage sits under the modeled range below; it is not a price.
In Tigard, the range moves with stump diameter, root flare and whether the grindings must be hauled. Ash stumps that need chips sized to the quarantine standard, or a backyard reached only through a gate, land higher in the table.
| Stump diameter | Modeled range |
|---|---|
| Under 12 in | $150 minimum |
| 12 to 24 in | $150 |
| 24 to 36 in | $150–$200 |
| 36 to 48 in | $150–$300 |
Modeled at $4 to $6 per inch of diameter with a $150 minimum, rounded to $50. Modeled estimate, not quotes (method).
Source: BLS Occupational Employment and Wage Statistics, May 2025, SOC 37-3013. Checked 2026-10-02.
Grindings, wood and quarantines
Mediterranean oak borer is also confirmed in Tigard. For infested oaks, the guidance is to burn or chip the tree to 1 in or less on site, stump included, and never move cut oak firewood more than 10 miles from where it grew. Report suspect trees with photos and a location to the Oregon Invasives Hotline.
Oregon DEQ sets the burn rules here; read Oregon yard debris burning rules before lighting anything. Most owners keep the grindings as mulch, which avoids the transport question entirely.
Burning the debris
Full rules, seasons and alternatives: yard debris burning rules in Oregon.
Source: Oregon DEQ. Checked 2026-10-02.
Replanting the spot
Grinding works year-round, but avoid hauling ash debris between April 1 and September 30 when the borer flies, or cover the load. Winter wet soils, when 69% of Washington County storm reports arrive, can leave ruts from the machine.
Replanting in the same spot means pulling out the chips first, because fresh grindings tie up nitrogen. Tigard sits in hardiness zone 9a, and a street tree removal usually carries a replacement requirement.
Hardiness zone 9a. Grinding vs full removal: which one you need.
Source: USDA Plant Hardiness Zone Map 2023 (OSU PRISM ZIP data). Checked 2026-10-02.
What to do next
Call 811, identify the species, and keep ash and oak grindings on site unless they meet the chip rule. Check the crew through the Oregon license lookup, and see the Tigard overview or Tigard tree trimming for the 50% pruning rule.
Back to tree service in Tigard · Stump grinding across WA and OR · Stump grinding in Oregon · cost guide.
Sources
- Tigard tree code (Tigard Municipal Code Title 8 Urban Forestry (8.02-8.16); penalties TMC 1.16.640; Community Development Code 18.420), checked 2026-10-02.
- BLS Occupational Employment and Wage Statistics, May 2025, SOC 37-3013, checked 2026-10-02.
- NOAA NCEI Storm Events Database, 2016 to June 2026, checked 2026-10-02.
- NWS zone-county correlation files (2019 to 2026 versions), checked 2026-10-02.
- Portland General Electric vegetation management, checked 2026-10-02.
- Oregon 811 locate rules, checked 2026-10-02.
- USDA Plant Hardiness Zone Map 2023 (OSU PRISM ZIP data), checked 2026-10-02.
Comparing quotes? Check these eight things first.
Two quotes for the same tree can differ by thousands. The gap is usually in what's included, not the cutting.
We don't vet or license anyone. These are the official lookups; each takes about a minute.
| What | Where | What it shows |
|---|---|---|
| Oregon CCB license | CCB license search | Active status, bond, insurance on file, complaints |
| Oregon LCB license | LCB verify a license | Landscape contracting license, which covers tree work |
| Washington contractor registration | L&I Verify | Registration, bond, workers' comp, lawsuits, violations |
| ISA Certified Arborist | ISA directory | Current certification and credential number |
How to read them: Oregon guide · Washington guide
Westcoast-Tree.org is an independent information site. If you call a number on this site, the call goes to a tree service that covers your area and we may be paid a referral fee by that company. We don't perform tree work and we don't vet, license or insure anyone. Cost figures are modeled estimates, not quotes (method). Not affiliated with the former Westcoast Tree Care Inc of Tumwater, WA.